Jones Freecarver 9000S 2024 - Men's Snowboard

Directional Flex Pattern

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

Flex Rating – 8/10 (1=Soft, 10=Stiff)

9mm Taper

3D Contour Base 2.0 – Moderate 3D-base contours featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

FSC™ Power Core – Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved maneuverability and stiffer through the tip and tail for stability and pop.

Triax Fiberglass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Power Sustainable Basalt Stringers – Sustainable stringers made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 9900 Base – Sintered Ultra High Molecular Weight polyethylene with carbon additives.

Traction Tech 3.0 – Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

FSC™ Ash Veneer – Thin wood veneer layer that functions as both a protective topsheet and a global reinforcement layer. The thin wood stringers that make up the wood topsheet provide even flex and suck up chatter from uneven snow conditions.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern

Board Size Chart