Yes. Hello Snowboard 2025 - Women's

The Hello was built in response to a growing demand for a true resort board. Using the same outline as the Hel YES. This model shares the edge hold and carving ability of UnderBite to deliver performance on the groomers, side-hits and in the park. The directional twin shape allows it board to float shamelessly through powder and chatter, making it a true quiver-killer.

Camber Profile

• Directional CamRock 2-3-2 – The response of camber with the floatability of rocker. By combining camber and rocker you allow the board to be both responsive and floaty. Camber between the feet acts as a spring keeping the contact points on the ground throughout the turn for better edge hold. Once compressed the camber will accentuate the rocker and lift the nose out more allowing it to float. 

Flex

• Flex Rating - 6/10 (1=Soft,10=Stiff)

Shape

• Directional Twin
• UnderBite – By indenting the edge under the feet a couple of millimeters, UnderBite acts as a serrated knife, redistributing rider weight and input power. This creates more leverage over the edges of the board for easier turn initiation, better edge hold, greater control, and smoother turns.

Core

• Full Poplar – YES.'s baseline core for tip-to-tail woodcore snowboard construction. A core that strikes a predictable balance between durability and consistent flex and lightweight feel.

Laminates

• Biaxial Glass

Base

• Sintered Spec – This is the term YES. uses and is the grey zone many companies play in. YES. calls it Sintered Spec because it’s hardness and chemical properties are very close to true sintered and it’s on-snow performance is also very close to true sintered - but it’s formed using the extrusion process. How? – Well the raw material is actually pre- consumer recycled (meaning it never left the factory) sintered base material. So while the heating and extrusion process has softened it slightly, it’s still much harder than true Extruded.

Binding Compatibility

• 2 x 4 Insert Pack

Board Size Chart

Size (cm)	146	149	152	155
Effective Edge (mm)	1110	1130	1150	1170
Tip Width (mm)	283	285	286	288
Waist Width (mm)	239	241	242	244
Tail Width (mm)	283	285	286	288
Sidecut Radius (m)	6.7	6.9	7.1	7.3
Stance Setback (mm)	10	10	10	10
Stance Range (in)	17.9 - 21.1	18.4 - 21.6	19.4 - 22.6	19.9 - 23.1
Rider Weight (lbs)	100 - 140	110 - 150	120 - 160	120 - 170