Description
Ride Berzerker Snowboard
The Berzerker is designed by one of the world’s smoothest snowboarders, Jake Blauvelt. Jake wanted a board that matched his smooth and effortless style in all terrain and conditions. You'll be impressed at how smooth the transition between turns is because of the tip rocker and a small amount of taper in the tail that improves edge-to-edge speed and float in powder. The Tapered Quadratic Sidecut has been enhanced to improve stability and edge hold. Carbon Slimerods® 2.0 have carbon for pop and a urethane core to smooth out the landings. The Berzerker is built for an all-mountain rider looking for performance. Like a Viking longship, the Berzerker is designed to sail in the shallows or plow through the deep, cut through ice, and take you to snowboard Valhalla. Pay attention to the waist width, because the standard sizes run a bit narrow and are optimized for a smaller boot. The wide sizes are more mid-wide, providing a good option for the size 11, 12 or 13 boots out there. If you've got a bigger foot or prefer a wider ride, check out the Algorythm or Pig Series.
Camber Profile
Directional Extra Camber – A directional shape with a hybrid profile that has more camber than rocker.
Flex
Directional
Response – Aggressive
Shape
Quadratic Sidecut – Blending of three radius points to improve turn initiation and exit while providing the best grip possible. Uniquely formulated for each model based on its shape and riding style.
Core
Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.
Laminates
Carbon Array™ 3 Laminates – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels -- 3 and 5.
Hybrid Glass – Triaxial on top, biaxial on base; balanced torsional flex and stiffness for better response with speed.
Carbon Slimerods® 2.0 – RIDE's Slimerods® give already fun and playful boards the added liveliness to set them apart from other boards. Using strategic placement in the board's tip and/or tail, this technology adds pop without the stiffness generally associated with snappy boards. Made up of flat carbon rods that wrap a urethane slime-core, Slimerods® have carbon for massive pop and a slime-core to smooth out the landing.
Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most.
Sidewalls
Roll-In Slimewall® – Unique 3D structure built around the urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.
Base
Stone Ground Sintered Base – High-end sintered base material that is more durable, harder and faster than extruded.
Edges
Standard Steel Edge – Rockwell 48 C. Ride's Austrian-made steel wraps the entire perimeter of your board for the best delam protection around.
Topsheet
Standard Topsheet – Durable urethane topsheet material with graphics only RIDE can bring you.
Binding Compatibility
2 x 4 Inserts
Board Size Chart
Size (cm) | 156 | 157W | 159 | 160W |
---|---|---|---|---|
Tip Width (mm) | 298 | 306 | 300 | 308 |
Waist Width (mm) | 247 | 255 | 249 | 257 |
Tail Width (mm) | 290 | 298 | 292 | 300 |
Sidecut Radius (m) | 4.7​/7.8​/4.1 | 4.6​/7.8​/4 | 5.1​/8​/4.6 | 5.1​/8​/4.6 |
Stance Setback (mm) | 19 | 19 | 19 | 19 |
Rider Weight (lbs) | 125-205 | 140-210 | 130-200 | 150-220​+ |
Need Expert Advice?
We know there are a lot of choices out there. If you need some guidance, let us know! Our experts have decades of experience and can help you narrow it down.
Contact Us