2024 Yes. 20/20 Snowboard
The design that redefined.
Four years ago, YES came out with a significant redesign of the original PowderHull that only seven years ago put a sizable dent in shred universe. Refined bottom contours have maintained the magical float that sets this board apart from everything else on the snow while improving the pop and landings of natural and man-made features. The eye catching coreless tech has made these more complex shapes possible, while removing critical swing weight from the board. And finally, MidBite has found its most effective home on twins so applying an aggressive version of this.
PowderHull 2.0 + Camber – The 3D PowderHull starts with a base profile combining two distinct rocker lines that when blended together create a pronounced base concave in the nose and tail. At the nose, the concave draws air under the board - just as a concave spoon-nose does on long boards in the surf - causing list and flotation. As the snow moves across the base, it releases off the tail and the exaggerated rocker line along the center, causing the tail to drop downward.
Flex Rating – 7/10 (1=Soft,10=Stiff)
True Twin – A completely symmetrical outline houses a centered stance that is effective on edge, a tip and tail, and is identical at both ends of the board. The radial sidecut is effective and predictable. The overall shape allows complete freedom of expression by keeping the board a neutral, yet responsive board.
MidBite – MidBite blends the response of a narrow waist width with the stability of a wider nose & tail.
Weightless Core – The Weightless Core strikes a critical balance between light weight and strength. Using a lower density species of Poplar in areas that are not as structured and Paulownia in the areas that are, Yes. was able to shave precious weight. This helps the board not only float, but "feel" floaty.
CoreLess Tech – CoreLess tech creates translucent "holes" in the PowderHull, allowing for a lighter swingweight and more refined bottom contours.
PH Sintered True – rue Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions. This “Sintered PH Spec” material is specifically chosen for unique flex qualities necessary for the PowderHull’s complex 3D surfacing.
2 x 4 Inserts
Board Size Chart
|Effective Edge (mm)||1135|
|Tip Width (mm)||317|
|Waist Width (mm)||264|
|Tail Width (mm)||317|
|Sidecut Radius (m)||6.5|
|Stance Setback (mm)||0|
|Stance Range (mm)||544-624|
|Rider Weight (lbs)||170-200|
Need Expert Advice?
We know there are a lot of choices out there. If you need some guidance, let us know! Our experts have decades of experience and can help you narrow it down.Contact Us